CEM CO-180 Digital Carbon Monoxide CO Gas Meter Beeper

This is a certified Brand New Digital carbon monoxide (CO) meter. This meter is very easy to use. With a push of button, you can measure the level of carbon monoxide in seconds, with accuracy up to a few parts per million (PPM). This CEM CO-180 meter is similar to Fluke CO-220, which retails for $290+. This meter uses the latest electrochemical sensors and can react to ambient changes in carbon monoxide quickly. It's an ideal tool for measuring CO levels in industrial environments, commercial buildings, or residential dwellings. This unit not only shows the reading in LCD display, it also beeps when the CO concentration is over 35 PPM (the higher the CO level, the faster the beep).

*** FREE *** Limited time only: A belt carrying pouch and a rubber holster are included for extra protection and convenience (as shown in the following photos).

*** WARNING: THIS IS NOT A SAFETY MONITOR DEVICE. IT SHOULD NOT BE USED AS A CO (CARBON MONOXIDE) DETECTOR, SMOKE ALARM OR OTHER PERSONAL SAFETY ITEM. IT IS DESIGNED ONLY TO MEASURE THE CO CONCENTRATION AS SPECIFIED HEREUNDER.

FEATURES

* Super Large 3 1/2 Digit(1999 counts) multifunction backlit LCD
* Pocket size and easy to use
* Fast sampling
* Max Hold and Data Hold
* Auto power off
* Back light with 4 LEDs
* Above 200 PPM, the beeper sounds continuously with the concentration of CO
* Complete with 9V battery
* Dimensions/Wt.: 160X56X40mm/180g

SPECIFICATIONS

Operating temperature	0 deg C to +50.0 deg C
Storage temperature	-30 deg C to +60.0 deg C
Operating humidity	0 - 99% relative humidity (non-condensing)
Measurement range	0 to 1000PPM
Measurement resolution	1PPM
Accuracy	5% or +/-10PPM
Warm up period	< 2 seconds
Battery	9V, NEDA 1604A or equivalent
Auto power off	Meter automatically shuts down after 15 minutes of inactivity
Sensor type	Stabilized electrochemical Gas-specific (CO)
Typical sensor life	3 years